Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2009 >> Compass 4WD L4-2.0L >> Repair and Diagnosis >> Transmission and Drivetrain >> Continuously Variable Transmission/Transaxle >> Seals and Gaskets >> Service and Repair >> Seal-Torque Converter >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation






INSTALLATION





1. Install torque converter seal using oil seal Installer 9858.






NOTE: Gauge Bar 6311 can be used for doing the following measurement.

NOTE: When conducting measurements, measure two or more places and calculate the average value.

2. Install the torque converter on the transaxle and measure the dimension (1) to see if it is at least 13 mm. If the measurement is less than 13 mm, the torque converter is not fully installed.

NOTE: Use the designated brand of CVT fluid. Use of other brands of CVT fluid other than the designated brand will deteriorate the driveability and the durability of the CVT, and will cause damage to the CVT.

3. Install the transmission Installation.

pro multis · About Operation CHARM