Clutch - Disassembly

DISASSEMBLY










NOTE: Refer to the exploded views as necessary when performing the following steps.






1. Remove the snap ring (1) from the forward clutch drum using a flat head screwdriver.





2. Remove the internal gear (1) from the forward clutch drum.





3. Remove the snap rings (1) from the forward clutch drum using a flat head screwdriver.





4. Remove the retaining plate (1), the drive and driven plates (3), and the dish plate (2) from the forward clutch drum (4).






CAUTION: Do not expand the snap ring beyond necessity and do not deform it.

5. Remove the snap ring (1), and remove the input shaft (2) from the forward clutch drum.





6. Place bottom of Compressor 8900 (1) in Vice (2).





7. Place the drum (1) over Compressor bottom 8900 in Vice (2).





8. Place correct ring (1) that comes with Compressor 8900 in drum (3).





9. Install threaded rod (1) that comes with Compressor 8900 (2) in drum (3).
10. Compress tool until the snap ring (4) can be removed.





11. Use snap ring pliers or a small screw driver to remove the snap ring (3) from the piston (1).





12. Remove snap ring.





13. Remove the piston (1) from the drum (3).
14. Remove the spring assembly (2) form the drum (3).