Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2009 >> Compass 4WD L4-2.0L >> Repair and Diagnosis >> Transmission and Drivetrain >> Manual Transmission/Transaxle >> Shift Linkage >> Shift Cable >> Service and Repair >> Gearshift Control Cable - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Gearshift Control Cable - Installation






INSTALLATION






CAUTION: Gearshift cable bushings must not be lubricated or the bushings will swell and split.

1. Install cable assembly through floor pan opening and secure to floor pan with grommet plate.
2. Route transaxle end of cable assembly into engine compartment and over transaxle assembly.
3. Connect cables (1) to the shift levers (3) at the transaxle.
4. Install cables (1) to bracket (4).





5. Install gearshift cables (1).
6. Install ORC Occupant Restraint Controller - Installation.
7. Install shifter Gearshift Mechanism - Installation.
8. Install battery tray.
9. Install battery and hold-down clamp.
10. Install the air cleaner assembly.
11. Connect battery cables.

pro multis · About Operation CHARM