Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2009 >> Compass 4WD L4-2.0L >> Repair and Diagnosis >> Transmission and Drivetrain >> Manual Transmission/Transaxle >> Shift Linkage >> Shift Cable >> Service and Repair >> Gearshift Control Cable - Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Gearshift Control Cable - Removal






REMOVAL





1. Remove the shifter Gearshift Mechanism - Removal.
2. Raise hood.
3. Remove the resonator.
4. Remove engine cover.
5. Remove air cleaner assembly.
6. Disconnect both battery cables. Battery - Removal
7. Remove battery hold down clamp and bolt, and remove battery.
8. Remove battery tray. Battery Tray - Removal
9. Disconnect cables (1) from the shift levers at the transaxle (3). CAUTION: Pry up with equal force on both sides of shifter cable isolator bushings to avoid damaging cable isolator bushings.

10. Squeeze cable retaining clips (2) and remove cables from bracket (4).





11. Remove the Occupant Restraint Controller (ORC) Occupant Restraint Controller - Removal.
12. Remove shifter Gearshift Mechanism - Removal.
13. Squeeze cable retaining clips (2) and remove cables from bracket.
14. Remove cable assembly (1) from vehicle.

pro multis · About Operation CHARM