Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2009 >> Grand Cherokee 2WD V8-4.7L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Accessories and Optional Equipment >> Parking Assist Control Module >> Service and Repair >> Park Assist Module - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Park Assist Module - Installation






INSTALLATION





1. Position the park assist module (3) to the mounting plate (4) and insert the two mounting tabs on the outboard side of the module into the slots in the plate.
2. Slide the module toward the outboard side of the mounting plate, then push downward on the module until the two latch features integral to the inboard side of the plate are fully engaged over the mounting tabs on the inboard (connector) side of the module.
3. Reconnect the underbody wire harness connector (2) to the module connector receptacle. Vehicles with the front park assist option will have a second connection to the module at this location, which must also be reconnected.
4. Reinstall the rear seat cushion onto the rear floor panel (1). Seat Cushion Cover - Installation.
5. Reconnect the battery negative cable.

pro multis · About Operation CHARM