Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2009 >> Liberty 2WD V6-3.7L >> Repair and Diagnosis >> Steering and Suspension >> Suspension >> Control Arm >> Control Arm Bushing >> Service and Repair >> Front Lower Control Arm Pivot Bushing - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Lower Control Arm Pivot Bushing - Installation






LOWER CONTROL ARM PIVOT BUSHING

NOTE: Suspension components with rubber/urethane bushings should be tightened with the full weight of the vehicle at normal ride height. It is important to have the springs supporting the full weight of the vehicle when the fasteners are torqued. If springs are not at their normal ride position, vehicle ride comfort could be affected and premature bushing wear may occur.






NOTE: Extreme pressure lubrication must be used on the threaded portions of the tool. This will increase the longevity of the tool and insure proper operation during the removal and installation process.

1. Install the new lower control arm bushings (3) into the lower control arm (4) using tools C-4212F (Press) (1), 9603-1 (driver) (2) and 9969 (receiver) (5) making sure the receiver cup is properly centered for the bushing to be pressed in to the proper depth.
2. Remove the control arm from the vise.
3. Install the lower control arm Front Lower Control Arm - Installation.
4. Perform a wheel alignment Service and Repair.

pro multis · About Operation CHARM