Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2009 >> Wrangler 4WD V6-3.8L >> Repair and Diagnosis >> Starting and Charging >> Charging System >> Alternator >> Service and Repair >> Generator - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Generator - Installation






INSTALLATION





1. Install generator mounting fasteners (1), (2), and (3) and tighten. Refer to Torque Specifications.

CAUTION: Never force a belt over a pulley rim using a screwdriver. The synthetic fiber of the belt can be damaged.

CAUTION: When installing a serpentine accessory drive belt, the belt MUST be routed correctly. The water pump will be rotating in the wrong direction if the belt is installed incorrectly, causing the engine to overheat. Refer to belt routing label in engine compartment, or refer to Belt Schematics in Cooling System.

2. Install generator drive belt.





3. Snap field wire connector (2) into generator.
4. Install B+ terminal to generator mounting stud. Tighten mounting nut. Refer to Torque Specifications.
5. Snap plastic cover (1) to B+ terminal.
6. Install negative battery cable to battery.

pro multis · About Operation CHARM