IOD Fuse - Description

DESCRIPTION

All vehicles are equipped with an Ignition-Off Draw (IOD) fuse that is disconnected within the Integrated Power Module when the vehicle is shipped from the factory. Dealer personnel are to reconnect the IOD fuse in the Integrated Power Module as part of the preparation procedures performed just prior to new vehicle delivery. The IOD fuse can be removed to avoid discharging the battery by disconnecting non-essential, low-current memory functions that are normally on at all times. A detent on the IOD fuse holder allows it to be stored in its normal cavity but out of contact. The holder is pushed into place to restore power to the systems it supplies. The following circuits are protected by the IOD fuse:

- Cluster (CCN)
- Electronic Overhead Module (EOM
- Sentry Key Remote Entry Module (SKREEM)
- Video Module (DVD system)
- Hands Free Telephone Module
- Map Lamps
- Glove Box Lamp
- Courtesy Lamps
- Radio
- Security Module (export markets)
- Traffic Control Module (export markets)