Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2010 >> Commander 2WD V6-3.7L >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Keyless Starting System >> Keyless Start Transmitter >> Technical Service Bulletins >> Recalls >> Recall - Wireless Ignition Node Receiver >> Service Procedure >> B. (DS/DJ/D2) Ram 1500/2500 Truck WIN Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

B. (DS/DJ/D2) Ram 1500/2500 Truck WIN Replacement

1. Disconnect and isolate the battery negative cable.

2. Remove the instrument panel knee bolster (Figure 1).





3. Remove the four Wireless Ignition Node (WIN) receiver mounting screws (Figure 2).

4. Disconnect the WIN electrical connector.

5. If equipped, remove the WIN antenna connector.

6. Remove and discard the original WIN from the instrument panel opening.

7. Connect the WIN electrical connector to the new WIN receiver.

8. If equipped, connect the WIN antenna connector to the new WIN receiver.

9. Install the WIN receiver into the instrument panel.





10. Install the four WIN mounting screws and tighten securely (Figure 3).

11. Install the instrument panel knee bolster (Figure 1).

12. Connect the negative battery cable.

13. Continue with Section E. Obtaining Vehicle Personal Identification Number (PIN).
pro multis · About Operation CHARM