Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2010 >> Commander 2WD V8-5.7L >> Repair and Diagnosis >> Body and Frame >> Seats >> Seat Temperature Switch >> Service and Repair >> Heated Seat Switch - Installation >> Second Row
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Second Row






INSTALLATION





1. Install the 2nd row heated seat switch assembly into the floor console rear trim panel. Push the switch firmly into the trim panel until the retaining tabs are fully seated.
2. If equipped, connect the 2nd row heated seat switches (1), 115 Volt power outlet (3) and the auxiliary audio jacks (2) electrical connectors to the floor console rear trim panel.





3. Align the trim panel (3) to the console and insert the bottom tabs into the mounting slots.
4. Tilt the upper edge of the trim panel (1) forward and apply hand pressure to seat all retaining clips.
5. Connect the battery negative cable.
6. Verify 2nd row heated seat system operation.

pro multis · About Operation CHARM