Headliner - Installation

INSTALLATION






CAUTION: Be careful not to crease the headliner.

1. Position the headliner in the vehicle through the liftgate door opening.
2. Connect the headliner wire harness connector located at the left D-pillar.
3. Connect the rear washer hose.
4. Raise the rear of the headliner upward.
5. Raise the front of the headliner upward and install the sun visor supports Visor - Installation.





6. Install the sun visors Visor - Installation.





7. Install the overhead console Overhead Console - Installation.
8. If equipped, connect the headliner wire harness connector(s) to the inside rear view mirror.
9. If equipped, connect the headliner wire harness connector to the rain sensor.
10. Connect the headliner wire harness connector located at the left A-pillar.
11. Install the grab handle above each rear passenger door Roof Grab Handle - Installation.





12. Install the A-pillar trim panel A-Pillar Trim Panel - Installation.





13. Install the upper B-pillar trim panel B-Pillar Trim Panel - Installation.
14. Install the upper C-pillar trim panel C-Pillar Trim Panel - Installation.





15. Install the D-pillar trim panels D-Pillar Trim Panel - Installation.





16. Install the rear header trim panel Rear Header Panel - Installation.
17. Seat the top of each of door seal to the door opening.
18. Place the rear passenger seats in the upright position.





19. Install the video monitor, if equipped Media System Monitor - Installation.