Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2010 >> Grand Cherokee 2WD V8-5.7L >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Crankshaft Position Sensor >> Service and Repair >> Crankshaft Position Sensor - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Crankshaft Position Sensor - Installation






5.7L






CAUTION: Before tightening the CKP sensor mounting bolt, be sure the sensor is completely flush to the cylinder block. If the CKP sensor is not flush, damage to the sensor mounting tang may result.

1. Clean out machined hole in engine block.
2. Apply a small amount of engine oil to sensor o-ring.
3. Install sensor (4) into engine block (1) with a slight rocking and twisting action.
4. Install mounting bolt and tighten to 28 Nm (21 ft. lbs.) torque(3).
5. Connect electrical connector (2) to sensor.
6. Lower vehicle.

pro multis · About Operation CHARM