Structural Dust Cover - Installation

INSTALLATION





1. Loosely install the 4 fasteners.
2. Ensure the dust cover is flush to the oil pan and transmission.
3. Tighten the bottom fastener to the transmission to 54 Nm (39 ft. lbs.).
4. Tighten the top bolt to the Oil Pan to 54 Nm (39 ft. lbs.).
5. Tighten the top bolt to the transmission to 54 Nm (39 ft. lbs.).
6. Tighten the bottom bolt to the Oil Pan to 54 Nm (39 ft. lbs.).





7. Lower the vehicle.
8. Lower engine into the mounts using Engine Support Fixture 8534B (1).
9. Remove the Engine Support Fixture 8534B (1).





10. Raise the vehicle.
11. Tighten the motor mount bolts (3).