Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Oxygen Sensor - Removal

2.0, 2.4L FWD

DOWNSTREAM OXYGEN SENSOR (1/2)

WARNING: THE EXHAUST MANIFOLD, EXHAUST PIPES AND CATALYTIC CONVERTER(S) BECOME VERY HOT DURING ENGINE OPERATION. ALLOW ENGINE TO COOL BEFORE REMOVING OXYGEN SENSOR. FAILURE TO ALLOW ENGINE TO COOL BEFORE REMOVAL MAY RESULT IN PERSONAL INJURY CAUSED BY BURNS.

CAUTION: When disconnecting sensor electrical connector, do not pull directly on wires going into oxygen sensor. Damage to the oxygen sensor may occur.

NOTE: Use an oxygen sensor (O2S) removal tool for this procedure.

1. Raise and support vehicle.
2. Disconnect O2S wire harness mounting clips from engine or body, if equipped.
3. Disconnect O2S pigtail harness connector (1) from engine wiring harness.
4. Remove the O2S (3) from catalytic converter (2).

UPSTREAM OXYGEN SENSOR (1/1)

WARNING: THE EXHAUST MANIFOLD, EXHAUST PIPES AND CATALYTIC CONVERTER(S) BECOME VERY HOT DURING ENGINE OPERATION. ALLOW ENGINE TO COOL BEFORE REMOVING OXYGEN SENSOR. FAILURE TO ALLOW ENGINE TO COOL BEFORE REMOVAL MAY RESULT IN PERSONAL INJURY CAUSED BY BURNS.

CAUTION: When disconnecting sensor electrical connector, do not pull directly on wires going into oxygen sensor. Damage to the oxygen sensor may occur.

NOTE: Use an oxygen sensor (O2S) removal tool for this procedure.

1. Raise and support vehicle.
2. Disconnect O2S wire harness mounting clips from engine or body, if equipped.
3. Disconnect O2S pigtail harness connector (1) from engine wiring harness.
4. Remove the O2S (3) from exhaust pipe (2).