Infrared Temperature Sensor - Installation

INSTALLATION

NOTE: Take the proper precautions to protect the front face of the overhead console from cosmetic damage while performing this procedure.





1. Position the infrared sensor (3) onto the back of the overhead console (4). Align the slot on the sensor with the retaining tabs (2) on the console.
2. Install the screw (1) that secures the infrared sensor to the overhead console. Tighten the screw to 1.2 Nm (10 in. lbs).
3. Install the overhead console. Make sure the retaining tabs are fully engaged to the headliner.
4. Reconnect the negative battery cable.