Crankshaft Position Sensor - Installation

INSTALLATION





1. Check O-ring for damage and lubricate the O-ring with engine oil before installing sensor.
2. Using a twisting motion, install the crankshaft position sensor.
3. Install the crankshaft position sensor bolt. Tighten the bolt to 9 Nm (80 in. lbs.).





4. Connect and lock the electrical connector to the crankshaft position sensor.





5. Install the heat shield (3) with one nut (1) and two heat shield retaining bolts (2).





6. Install the upstream O2 sensor wire harness retainer (1) and crankshaft position sensor wire harness retainer (2) to the heat shield (3).





7. Install the air cleaner body (1) Air Cleaner Body - Installation





8. Connect the negative battery cable.
9. Install the engine cover (1).