Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2010 >> Patriot 4WD L4-2.4L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Fuel Level Sensor >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la
If it fails: lemon-manuals.org.ua

Or, hide this message: temporarily or permanently

Installation





INSTALLATION






CAUTION: Do not touch the terminals or the resistor card.

CAUTION: Do not handle the new fuel level sending unit by the float arm.

1. Position the new fuel level sending unit to the fuel pump module reservoir.





2. Gently push the fuel level sending unit down until the snap tab (2) engages.






CAUTION: Ensure the fuel level sending unit wires are routed so they do not get pinched between the coils of the spring when the module is completely compressed.

3. Connect the fuel level sending unit electrical connector.
4. Install the fuel pump module Fuel Tank - Installation.

pro multis · About Operation CHARM