Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2011 >> Compass 4WD L4-2.4L >> Repair and Diagnosis >> Body and Frame >> Seats >> Seat Temperature Switch >> Service and Repair >> Heated Seat Switch - Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Heated Seat Switch - Removal






REMOVAL

WARNING: Disable the airbag system before attempting any steering wheel, steering column, or instrument panel component diagnosis or service. Disconnect and isolate the negative battery (ground) cable, then wait two minutes for the airbag system capacitor to discharge before performing further diagnosis or service. This is the only sure way to disable the airbag system. Failure to follow these instructions may result in accidental airbag deployment and possible serious or fatal injury.

NOTE: Take the proper precautions to protect the front face of the accessory switch bank bezel from cosmetic damage while performing this procedure.






NOTE: Typical accessory switch bank and bezel shown.

1. Disconnect and isolate the negative battery cable.
2. Remove the accessory switch bank bezel (4) from the instrument panel and place it on a work bench.
3. Remove the four screws (1 and 3) that secure the accessory switch bank (2) to the back of the bezel and remove the switch bank.

pro multis · About Operation CHARM