Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2011 >> Compass 4WD L4-2.4L >> Repair and Diagnosis >> Brakes and Traction Control >> Hydraulic System >> Wheel Cylinder >> Service and Repair >> Removal and Replacement >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation






INSTALLATION





1. Install the wheel cylinder onto the brake support plate. Install and tighten the mounting screws (1) to 13 Nm (115 in. lbs.).
2. Hand start the brake tube nut (2) into the wheel cylinder (1). Tighten the tube nut to 17 Nm (150 in. lbs.).






NOTE: Inspect the brake shoes before installation. Inspection

3. Install the drum brake shoes (6) and drum. Adjust shoes as necessary. Installation





4. Install the tire and wheel assembly (1) . Tires And Wheels - Installation Install and tighten the wheel mounting nuts (3) to 135 Nm (100 ft. lbs.).
5. Slowly rotate the rear wheel and verify that the brake drum lightly drags on the shoes.
6. Lower the vehicle.





7. Remove the brake pedal holder.
8. Bleed the wheel cylinder as necessary. Service and Repair
9. Road test the vehicle to make sure the brakes operate correctly.

pro multis · About Operation CHARM