Fuel Tank - Installation

INSTALLATION

Special Tools:










1. Install fuel tank straps.





2. Raise fuel tank into position.
3. Position fuel tank straps. Tighten fuel tank strap bolts to 47 Nm (34.5 ft. lbs.). Remove transmission jack. Ensure straps are not twisted or bent.





4. Install parking brake cable.





5. Install parking brake cable.





6. Connect filler tube recirculation vent line and purge line.





7. Connect fuel fill tube to tank inlet. Tighten hose clamp to 4 Nm (35 in. lbs.).





8. Connect vapor canister line.





9. Install rear driveline module Installation.





10. Install stay bars Installation.





11. Install splash shield.





12. Install splash shield.





13. Install exhaust system (1).
14. Install drive shaft (2) Propeller Shaft - Installation.
15. Install the fuel tank skid plates, if equipped.





16. While holding the pump module in position, install lock ring and use Fuel Pump Lock Ring Wrench or equivalent to tighten lock ring.
17. Connect electrical connector and lock the connector.
18. Connect the fuel line. Service and Repair





19. Install plastic cover.





20. Install rear seat cushion.
21. Reconnect the negative battery cable.
22. Install the air cleaner lid, connect the inlet air temperature sensor and makeup air hose.
23. Fill fuel tank with clean fuel. Use a scan tool to pressurize the system and check for leaks.