Electronically Controlled Clutch - Removal

REMOVAL





1. Raise vehicle on a hoist.
2. Remove the rear propeller shaft.Propeller Shaft - Removal
3. Remove the exhaust system up to the catalytic converter.Removal
4. Remove the ECC wire routing bracket bolt and bracket.
5. Disconnect ECC breather hose.
6. Unplug the electrical connector (3).
7. Remove the four ECC mounting bolts (1).
8. Slide ECC from rear axle and lower.
9. Remove all old gasket material on the mating surfaces of the ECC and RDA. Remove wave washer.