Cabin Compartment Node (CCN)

C15A8-AIR SUSPENSION DOWN BUTTON STUCK

For a complete wiring diagram, refer to the Wiring Information.

- When Monitored:
With the ignition on.

- Set Condition:
The Cluster detects the Air Suspension DOWN Switch active for greater than 20 seconds.





CHECK FOR AN ACTIVE DTC

NOTE: Inspect the DOWN button for foreign material which could keep it from returning back to the not pushed state. Clear out any foreign material.

1. Turn the ignition on.
2. With the scan tool, read DTCs.

Does the scan tool display this DTC as active?

Yes

- Replace the Terrain Switch. Terrain Select Switch - Removal.
- Perform the BODY VERIFICATION TEST. Body Verification Test.

No

- The condition that caused this code to set is not present at this time. Check for an intermittent condition by inspecting the related wiring harness for chafed, pierced, pinched, and partially broken wires. Also inspect the related connectors for broken, bent, pushed out, spread, corroded, or contaminated terminals.
- Perform the BODY VERIFICATION TEST. Body Verification Test.