Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2011 >> Wrangler V6-3.8L >> Repair and Diagnosis >> Body and Frame >> Interior Moulding / Trim >> Console >> Service and Repair >> Center Console - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Center Console - Installation






INSTALLATION





1. Position the console (2) over the shifters and brake levers and seat fully.
2. Install the four screws (3).





3. Position the bezel (2) over the shifters seat the clips fully.
4. Install the cup holder and ash receiver, if equipped.
5. If equipped, position the transfer case shifter knob (1) onto the shift shaft, a audible click should be heard when the shifter knob is fully seated.





6. Seat the shifter boot (2) onto the console bezel (1) and seat fully.
7. Connect battery negative cable.





8. Connect the electrical connectors (2), if equipped.
9. Position the rear bezel (1) back into place and seat the clips fully.
10. Install the 115V power outlet. 115 V Power Outlet
11. Install the 12V power outlet. 12 V Power Outlet

pro multis · About Operation CHARM