Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2011 >> Wrangler V6-3.8L >> Repair and Diagnosis >> Body and Frame >> Seats >> Seat Temperature Control Module >> Service and Repair >> Heated Seat Module - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Heated Seat Module - Installation






INSTALLATION

CAUTION: Properly align the tab and retainer for the Heated Seat Module (HSM) to the holes in the instrument panel support, prior to engagement. Failure to follow these instructions may result in damage to the HSM tab and retainer.





1. Position the Heated Seat Module (HSM) (1) to the instrument panel and connect the wire harness connector (3).
2. Align the tab and push-pin retainer to the holes in the instrument panel support (2) and fully engage the retainer to the support.
3. Install the radio Radio - Installation.
4. Reconnect the negative battery cable.
5. Verify proper heated seat system operation.

pro multis · About Operation CHARM