Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2011 >> Wrangler V6-3.8L >> Repair and Diagnosis >> Steering and Suspension >> Suspension >> Control Arm >> Service and Repair >> Rear Upper Control Arm - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Rear Upper Control Arm - Installation






INSTALLATION






NOTE: Position the paint dot located on the control arm toward the axle and facing outboard. If paint dot is not visible, the bend should point inboard, and the short end should attach to the axle side.

1. Position the upper suspension arm (2) in the axle bracket and frame rail mount.
2. Install the mounting bolt (1) and finger tighten.
3. Remove the supports and lower the vehicle.
4. Tighten the upper suspension arm bolts to 169 Nm (125 ft. lbs.) with vehicle weight.

pro multis · About Operation CHARM