Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2011 >> Wrangler V6-3.8L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Shift Linkage >> Shift Cable >> Service and Repair >> Shift Cable - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Shift Cable - Installation






INSTALLATION










1. Install the shift cable to the shifter assembly bracket. Push cable into the bracket until secure.
2. Place the floor shifter lever in PARK position.
3. Loosen the adjustment screw on the shift cable.
4. Snap the shift cable onto the shift lever pin.









5. Raise the vehicle.
6. Install the shift cable to the shift cable support bracket.
7. Shift the transmission into PARK. PARK is the rearmost detent position on the transmission manual shift lever.
8. Snap the shift cable onto the transmission manual shift lever.









9. Lower vehicle.
10. Shift the transmission into PARK. PARK is the rearmost detent position on the transmission manual shift lever. Rotate the rear prop shaft until locks.
11. Tighten the adjustment screw to 7 Nm (65 in.lbs.).
12. Verify correct shifter operation.
13. Install any console parts removed for access to shift lever assembly and shift cable.
pro multis · About Operation CHARM