Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2012 >> Compass 4WD L4-2.4L >> Repair and Diagnosis >> Heating and Air Conditioning >> Auxiliary Cabin Heater >> Service and Repair >> Cabin Heater - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Cabin Heater - Installation






INSTALLATION






NOTE: LHD model shown. RHD model similar.

1. Carefully install the positive temperature coefficient (PTC) heater unit (2) into the left side of the HVAC air distribution housing (3). Make sure to position the two locator tabs on the end of the heater unit into the molded locator indentations on the right side of the air distribution housing.
2. Install the two screws (1) that secure the PTC heater unit to the air distribution housing. Tighten the screws to 1.2 Nm (10 in. lbs.).






NOTE: PTC heater shown removed from distribution housing for clarity.

3. Connect the wire harness connector (1) to the PTC heater unit (3) while pushing upward on the connector lock (2). Make sure the wire harness connector and lock are fully engaged.
4. Install the instrument panel Instrument Panel - Installation.
5. Reconnect the negative battery cable.

pro multis · About Operation CHARM