Input Flange Seal - Installation

INSTALLATION

Special Tools:










1. Coat the edge face of the seal with the liquid gasket sealer.
2. Install wave washer.
3. Install the pinion seal using Installer.





4. Install the ECC onto the RDA.
5. Install the mounting bolts (1) that hold the ECC to the RDA and Tighten to 78 Nm (58 ft. lbs.).
6. Plug in the electrical connector (3).
7. Install the propeller shaftPropeller Shaft - Removal.
8. Fill RDA as neededPropeller Shaft - Removal.
9. Lower vehicle and road test.