Body and Frame: Specifications
WELD PROCESS
CAUTION: All welds should conform to the Chrysler LLC vehicle engineering process standard PS 9472.
These Procedure Specifications are appropriate as of this publication date 8/1/2007. Procedures may be superceded with new spec's at a later date.
Always process to the thinner material thickness (TMT)
All persons performing welding must be qualified to weld in all positions.
NOTE:
1. Must remove Zinc Coating on both sides of metal at the weld zone.
2. MIG Braze welding process requires use of Pulse Arc(R) or STT(R) welding machine.
3. Must use Lincoln(R) product since E 71T-11 product differs from other suppliers.