Front

INSTALLATION

NOTE: LHD model shown in illustrations. RHD model similar.

DRIVER SIDE





1. Install the driver side front floor duct (3) to the driver side of the air distribution housing (2) and install the two retaining screws (1). Tighten the screws to 1.2 Nm (10 in lbs.).
2. If equipped, install the silencer below the driver side of the instrument panel.

PASSENGER SIDE






NOTE: Illustration shown with air distribution housing removed from HVAC housing for clarity.

1. Install the upper front passenger side floor duct (2) to the passenger side of the air distribution housing (3) and install the two retaining screws (1). Tighten the screws to 1.2 Nm (10 in lbs.).





2. Connect the lower front passenger side floor duct (3) to the upper front passenger side floor duct (4).
3. Install the two screws (2) that secure the lower front passenger side floor duct to the bottom of the HVAC housing (1). Tighten the screws to 1.2 Nm (10 in lbs.).
4. Install the HVAC housing assembly HVAC Housing - Installation.