Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2012 >> Liberty 2WD V6-3.7L >> Repair and Diagnosis >> Powertrain Management >> Fuel Delivery and Air Induction >> Accelerator Pedal >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation






INSTALLATION





The accelerator pedal and APPS (Accelerator Pedal Position Sensor) are serviced as a complete assembly including the bracket.

1. Position the accelerator pedal/APPS assembly over the two mounting studs.
2. Install two accelerator pedal mounting bracket nuts (2) and tighten to 12 Nm (9 ft. lbs.).
3. Connect the accelerator pedal electrical connector (3) to the APPS.
4. Use a scan tool to learn electrical parameters. Go to the Miscellaneous menu, and then select ETC Learn.

NOTE: If the previous step is not performed, a Diagnostic Trouble Code (DTC) will be set.

5. If necessary, also use a scan tool to erase any Diagnostic Trouble Codes (DTC's) from the PCM.
6. Before starting the engine, operate the accelerator pedal to check for any binding.

pro multis · About Operation CHARM