Right Side

RIGHT SIDE

1. Install the upper control arm to the vehicle.
2. Install the upper control arm front flag bolt. With full vehicle weight, tighten the nut to 122 Nm (90 ft.lbs.).
3. Install the upper control arm rear flag bolt. With full vehicle weight, tighten the nut to 122 Nm (90 ft.lbs.).
4. Install the air box.
5. Install the upper ball joint nut. Tighten the nut to 41 Nm (30 ft.lbs.) plus an additional 90° turn.
6. Install the right side tire and wheel assembly. Service and Repair.
7. Remove the supports and lower the vehicle.
8. Set the toe Toe Adjustment.