Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2012 >> Liberty 2WD V6-3.7L >> Repair and Diagnosis >> Steering and Suspension >> Suspension >> Control Arm >> Service and Repair >> Rear Upper Control Arm - Installation >> Left Side
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Left Side






LEFT SIDE






NOTE: All torques should be done with vehicle on the ground with full vehicle weight.

1. Position the upper suspension arm (2) in the frame rail bracket.
2. Install the mounting bolt and nut (1) Tighten to 95 Nm (70 ft. lbs.). with full vehicle weight.
3. Position the upper suspension arm in the axle bracket.
4. Install the mounting bolt and nut. Tighten to 115 Nm (85 ft. lbs.). with full vehicle weight.
5. Raise the fuel tank back into place and secure Fuel Tank - Installation.
6. Remove the supports and lower the vehicle.

pro multis · About Operation CHARM