Installation

INSTALLATION





1. Clean cover and mating surface.
2. Apply a bead of Mopar Axle RTV sealant (1) or equivalent to the differential cover (2).

CAUTION: If cover is not installed within 3 to 5 minutes, the cover must be cleaned and new RTV applied. Failure to follow these instructions will result in a leak.






3. Install differential housing cover (1) and tighten bolts in a criss-cross pattern to 19-26 Nm (14-19 ft. lbs.).





4. Install oil filter drain tray (1) and tighten nut to 23 Nm (200 in. lbs.).
5. Install vent hose (2) on differential cover with new clamp.





6. Install front axle bracket bolts (2) and nuts. Tighten nuts to 61 Nm (45 ft. lbs.).
7. Tighten front axle bracket cradle nut (1) to 61 Nm (45 ft. lbs.).
8. Install skid plate.