Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2012 >> Wrangler V6-3.6L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Sensors and Switches - Computers and Control Systems >> Coolant Temperature Sensor/Switch (For Computer) >> Service and Repair >> Engine Coolant Temperature Sensor - Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Engine Coolant Temperature Sensor - Removal






3.6L

WARNING: Hot, pressurized coolant can cause injury by scalding. Cooling system must be partially drained before removing the coolant temperature sensor.





1. Disconnect the negative battery cable.
2. Partially drain the cooling system.
3. Remove the drivers side front inner wheel splash shield Splash Shield - Removal.





4. Disconnect the electrical connector (1) from the engine coolant sensor (2).
5. Remove the sensor from the cylinder head.

pro multis · About Operation CHARM