Transmission Position Sensor/Switch: Testing and Inspection

Description:

OPERATION
1. Verify that the starter operates with the ignition switch at START position and the selector lever in P and N ranges only.
2. Verify that the back-up lights illuminate when shifted to R range with the ignition switch in the ON position.
3. Check the transaxle range switch if not as specified.

Spec Chart:

Description:

Connector View:

CONTINUITY
1. Disconnect the transaxle range switch connector.
2. Check continuity of the terminals.
3. If not correct, replace the switch and adjust the transaxle range switch.
4. If correct, check or adjust the selector lever.