Operation CHARM: Car repair manuals for everyone.
Home >> Kia >> 1996 >> Sephia Sedan L4-1.6L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Testing and Inspection >> Initial Inspection and Diagnostic Overview >> After Repair Procedure
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

After Repair Procedure


After Repair Procedure

1. Cancel the memory of DTC's by disconnecting the negative battery cable for at least twenty seconds. Reconnect the negative battery cable.
2. Locate the OBD-II DLC (data link connector) and plug an OBD-II scan tool into it.
3. Turn the ignition switch ON.
4. Start and warm engine, then run at 2,000 rpm for three minutes.
5. Following the scan tool manufactures instructions, verify that no DTC '5 (diagnostic trouble codes) are recorded.
6. If DTC's are recorded, refer to Trouble Code Descriptions.
Diagnostic Trouble Code Descriptions

pro multis · About Operation CHARM