Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Pressure Testing Procedures

WARNING: The fuel system remains under pressure when the engine Is not running. Release fuel system pressure before disconnecting any fuel line to reduce the chance of personal injury or fire damage to vehicle components.

Fuel pump maximum pressure
Perform pump operation inspection if regulated pressure is not as specified.
1. Disconnect negative battery terminal.
2. Release fuel system pressure. Refer to Releasing fuel system pressure.
3. Remove rear seat cushion.




4. Connect SST(0K2A1 131 001) to main fuel line as shown.
5. Connect negative battery terminal.

WARNING: The fuel system remains under pressure when the engine is not running. Release fuel system pressure before disconnecting any fuel line to reduce the chance of personal injury or fire damage to vehicle components.





6. Connect data link connector terminals FUEL PUMP and B+ with jumper wire.
7. Turn ignition switch ON.
8. Measure fuel pump maximum pressure.

Fuel pump maximum pressure: 65 - 94 psi (450 - 650 kPa, 4.5 - 6.5 kg-m)

9. If not within specification, replace fuel delivery module.