Shift Mechanism

Overhaul








1. Disassemble in the order shown in the figure.
2. Inspect all parts and repair or replace as necessary.
3. Assemble in the reverse order of disassembly.

Assembly note
Extension bar
1. Install the extension bar to the floor, and then onto the transaxle. Tighten the extension bar nut at the transaxle.
Tightening torque: 23 - 34 ft. lbs. (31 - 46 Nm, 3.2 - 4.7 kg.m)





2. Tighten the shifter bracket nuts to the specified torque.
Tightening torque: 86.9 - 130.2 inch lbs. (9.8 - 14.7 Nm, 100 - 150 kg.cm)

Spring





Make sure that the hooked part of the spring is properly seated in the bracket groove, as shown in the figure.