Manual Transaxle Control

MANUAL TRANSAXLE CONTROL





COMPONENTS

REMOVAL
1. Remove the console assembly.
2. Remove the self locking pin and clips (shift lever side).
3. Remove the shift lever assembly.





4. Remove the retainer and bolts.
5. Remove the snap pin and clips (Transaxle side).
6. Remove the shift cable and select cable.

INSPECTION
1. Check the select cable for proper operation and for damage.
2. Check the shift cable for proper operation and for damage.
3. Check the boot for damage.
4. Check each bushing for wear, abrasion, sticking, restricted movement or damage.
5. Check for a weak or damaged spring.

REASSEMBLY
1. Install the shift lever assembly.
2. Installation of shift lever and select cable.