Accelerator Pedal: Service and Repair

REMOVAL
1. Remove the bushing and inner cable of the accelerator arm side.




2. Pull the left side of the accelerator pedal toward you, and then remove the accelerator pedal from the accelerator arm.




3. Loosen the bolt of the accelerator arm bracket and remove.

INSTALLATION




1. When installing the return spring and accelerator arm, apply multi-purpose grease around each moving point of the accelerator arm.




2. Apply sealant to the bolt mounting hole, and tighten the accelerator arm bracket.

Tightening torque
Accelerator arm bracket bolts : 8 - 12 Nm (80 - 120 kg.cm, 6 - 7 lb.ft)




3. Securely install the resin bushing of the accelerator cable on the end of the accelerator arm.