Front Bumper: Service and Repair

Removal
1. Remove two nuts and four fasteners from top of the bumper.
2. Remove three bolt and four fasteners from air guide.




3. Remove air guide.




4. Remove three fasteners from right mud guard.
5. While pulling right mud guard, remove one screw from side of bumper.




6. Repeat for left side.
7. Remove two bolts from the left-hand bumper support bracket.
8. Repeat for the right side.




9. Remove bumper assembly.

Installation
1. Install front bumper in reverse order of removal.

Tighten bumper mounting bolts to 23 - 34 lb-ft (32 - 47 N.m, 3.2 - 4.7 kg-m)

2. Check the light system and adjust headlights and fog lights.