Trunk / Liftgate Handle: Service and Repair

Outside handle

Removal
1. Remove rear hatch trim. Refer to "Trim".
2. Licence plate light assembly. Refer to "Exterior lights".
3. Disconnect remote control rod from outside handle assembly.
4. Remove two mounting bolts from outside handle assembly.




5. Remove outside handle.

Installation
1. Install out side handle.
2. Install two mounting bolts to outside handle assembly.
3. Connect remote control rod to outside handle assembly.
4. Install license plate light assembly. Refer to "Exterior light".
5. Install rear hatch trim. Refer to "Trim".