Fluid Condition (Replacement)
FLUID CONDITION (REPLACEMENT)General process
1. Place a drain pan under transaxle drain plug.
2. Remove auto transaxle drain plug and allow automatic transaxle fluid to fully drain.
3. Install drain plug with specified torque.
Tightening torque: 29 - 40 ft. lbs. (39 - 54 Nm, 4.0 - 5.5 kg-m)
4. Remove ATF level gauge, then pour specified ATF.
ATF type: SK ATF SP-III or DIAMOND ATF SP-III
Capacity: 6.2 US qt (5.9 liter, 5.2 Imp qt)
CAUTION: Do not over fill above Hot range.
5. Check ATF level.