Brake Hose/Line: Service and Repair

Removal
1. Remove brake pipe with SST (OK130 430 019).





2. Disconnect clip and remove flexible hose from bracket.

Installation





1. Place flexible hose in bracket and connect clip to it.





2. Connect flexible hose to brake pipe and tighten flare nut with SST (OK130 430 019).

Caution:
a Verify that hose is not twisted.
b Verify that hose does not touch other parts when vehicle bounces or when steering wheel is turned fully right or left.

Tightening torque: 9 - 16 ft. lbs. (13 - 22 Nm, 1.3 - 2.2 kg-m)