Rear Wiper Arm

Rear window wiper arm

Removal
1. Before removal, check that the wiper has stopped at its off position.
2. Remove nut cover and then wiper arm nut.

3. Remove wiper arm.

Installation
1. Place the wiper arm on the pivot shaft.
2. Install the nut and tighten.

Tighten nut to 106 lb.in (12 N.m).

Note: You should not run rear wiper on a dry window.

3. Install nut cover and check arm movement across rear window. The wiper arm should stop 0.6" (15 mm) from the left edge of the rear window.