Removal

REMOVAL





1. Remove the bolt (c) fixing the trailing arm (A) to the rear carrier (B).





2. Remove the bolt (c) fixing the rear suspension arm (A) to the rear carrier (B).
3. Employ the same manner described above step 1 and step 2 to the other side.





4. After supporting the rear cross member assembly (B) with a jack (A), remove the two cross member fixing bolts (C). Employ the same manner described above to the other side.

CAUTION: The rear cross member assembly (B) is unstable on the jack(A); be careful not to allow it to fall.

5. Lowing the jack, remove the rear cross member and rear suspension arms as an assembly.





6. Remove the two rear suspension arm - to - cross member bolts (A, B).
7. Remove the rear suspension arms.