Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Seals and Gaskets: Service and Repair

DRIVE SHAFT OIL SEAL REPLACEMENT

REMOVAL
1. Disconnect the driveshaft from the transaxle.
2. Using a flat - tip screwdriver, remove the oil seal.

INSTALLATION
1. Apply a coating of gear oil to the lip of the oil seal.
Auto transaxle fluid: GENUINE ATF, DIAMOND ATF SP - III, SK ATF SP - III





2. Using special tool(09431 - 39000) or equivalent, tap the driveshaft oil seal into the transaxle.
3. Installation is the reverse of removal.
4. Refill the transaxle fluid.
5. Start engine and the transaxle range selector lever through all gear positions. Refill as necessary.