Operation CHARM: Car repair manuals for everyone.
Home >> Kia >> 2005 >> Amanti V6-3.5L >> Repair and Diagnosis >> Body and Frame >> Body Control Systems >> Body Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Body Control Module: Service and Repair

REMOVAL AND INSTALLATION

1. Disconnect the negative(-) battery terminal.




2. Remove the drive lower crash panel after removing the side mounting cover.

3. Loosen the BCM mounting bolt and disconnect the connector.




4. Installation is the reverse of removal procedures.

NOTE: If the battery voltage is disconnected for more than about 10 seconds, BCM is reset.

WARNING:
- When learning the BCM after replacing it, enter the correct PIN code.
- Once if the incorrect PIN code is entered, BCM cannot be reused.
- Check the BCM state by using Hi-scan.
pro multis · About Operation CHARM