Steering Control Module: Service and Repair

ELECTRONIC POWER STEERING CONTROL MODULE





The EPSCM is installed right of the passenger airbag module.

REMOVAL
1. Remove crash pad plate (RH).
1) Remove side mounting cover.





2) Remove crash pad plate screw (4).
2. Remove under cover.





1) Remove under cover.
2) Remove under cover lamp.





3. Remove glove box cover.
1) Remove glove box stoppers (2).
2) Remove glove box damper wire.
3) Remove glove box hinge pins (2).
4. Remove glove box housing.





1) Remove glove box housing screws (5).
2) Disconnect glove box housing connector.





5. Remove EPSCM.
6. Install in reverse order of removal.